Automotive Headrest Armrest Production Line

The ring-shaped production line is a horizontal ground elliptical traveling trolley with an externally hung mold frame structure layout, and a track switch mold. The total length is 16.5 meters; it is driven by a reducer chain, and the linear speed is adjustable by frequency conversion; 42 mold frame cars can be symmetrically mounted on the ring line, and the mold frame cars are connected to the ring line through the hanging plate. The mold frame cars have four universal directions. The wheel can be pulled out of the circular line; the air source and hot water of the circular line are introduced from the middle with a water and air integrated rotary joint and move back and forth in a straight line along the center line of the circular line. The external line of the mold temperature machine is the same as the air supply mode; except for the circular line There is no electrical signal access outside the reducer, tensioning mechanism, and lubricating device; each mold carrier is equipped with a pair of mold bases, and each mold base has 2 products. All movements of the mold carrier air cushion and the mold rely on pneumatic control.